Attività

PRODUCT
INTRODUCTION:
The model is made by high grade acrylic glasses, Good streamline feeling, With accurate alarm and high detecting rate, Passed the test by European Union CE and international Quality inspection center,Can be extended to EM+RFID double system, Designed for the worldwide small and medium size of Library, book stores pharmacy store, cosmetics store etc.
TECHNIQUE CHARACTERS:
Model NoEMC01
Input Voltage220V/AC
Output Voltage AC;Double aisle 15V,Single aisle 5V
Output Power35W
Inner coilPure Copper Coil
Detection RangeHeight 5-155cm, Width 75-90cmAverage
Average Trouble-free time鈮?0000hours
Signal Processing Digital DMPD(Dynamic phase detection) technology,
DSP multiple filtering technology
Dimensions145 (H) * 55 (L) * 4(W) cm
Package158 (H)* 67 (L) *21 (W)cm
Weight44kg (with back plate)
PRODUCT FEATURES:
鈼廇pplied Digital Signal Processing (DSP) with high alarm rate
鈼廇pplied Digital Dynamic Phase Detection (DMPD) to make system work more stable
鈼廟ealized the linkage with the monitoring by the reserved signal input port
鈼廌etects labels on metal
鈼廌etects labels covered in aluminum foil
鈼廋ompatible with the worldwide different sizes of same frequency EM labels
5.APPLICATION CASES:
FAQ锛?/strong>
Q: Turn on the host power, the host is not working, and the panel head is not displayed?
A: 鈶燙heck the power socket for power supply or bad contact.
鈶heck to see if the power cord is properly connected, or if there is a break in the power cord.
鈶heck the power fuse, If the power fuse is broken, replace the fuse.
Q: No alarm, power on, instrument panel display normal?
A: 鈶燙heck to see if there is a magnetic stripe in the book, or try a few more books, or try it directly with a magnetic strip. (when using a composite magnetic strip, it is best to charge the magnetic strip with a permanent magnetic strip.)
鈶heck whether the signal wire connected to the port on the back panel of the host machine is detached or bad connect
Q: The alarm is always on?
A: 鈶燭urn off other electronic devices around the instrument first to see if the device is always alarming. If it works, adjust the distance between the detector and other electronic devices. If not, adjust the benchmark +, benchmark – knob and increase the difference between the two Numbers until it doesn’t ring
鈶ove the host of the monitor to ensure that the distance between the host and the channel is over 1.5 meters. It is best to use the full length of the signal lineEAS EM System Free Sample
website:http://www.emeno-security.com/eas-anti-theft-system/eas-em-system/